ZyXEL Communications MWR211 - V1.0 Manual page 197

Pressing the Reset button in this section clears all user-entered
configuration information and returns the MWR211 to its factory
defaults.
Reset
You can also press the RESET button on the rear panel to reset
the factory defaults of your MWR211. Refer to the chapter about
introducing the Web Configurator for more information on the
RESET button.
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default
MWR211 IP address (192.168.10.1). See
up your computer's IP address.
MWR211 User's Guide
Appendix C
197
for details on how to set