What You Can Do; Rip Screen - ZyXEL Communications MWR211 - V1.0 Manual

Ch a p t e r
17. Routing Information
17.1 Overview
Routing Information Protocol (RIP) is an interior or intra-domain routing protocol
that uses distance-vector routing algorithms. RIP is used on the Internet and is
common in the NetWare environment as a method for exchanging routing
information between routers.
17.2

What You Can Do

Use the RIP screen
17.3

RIP Screen

Use this screen
to enable RIPv1 or RIPv2, which are LAN broadcast protocols
Network > RIP. The screen appears as shown.
Figure 93 Network > RIP
The following table describes the labels in this screen.
MWR211 User's Guide
to enable RIPv1 or RIPv2, which are LAN broadcast protocols
149
1 8
Protocol
.
. Click