Resetting To The Factory Default - ZyXEL Communications ES-4124 User Manual

43.6.2 Resetting to the Factory Default

Follow the steps below to reset the switch back to the factory defaults.
1 Enter
erase running config
2 Enter
write memory
reset the second configuration file, use the
specified index number.
The following example resets both configuration files to the factory default settings.
sysname# erase running-config
sysname# write memory
sysname# write memory 2
Chapter 43 User and Enable Mode Commands
to reset the current running configuration.
to save the changes to the current configuration file. If you want to
write memory
ES-4124 User's Guide
command again with the
303