ES-4124 User's Guide
Figure 25 System Info
The following table describes the labels in this screen.
Table 8 System Info
LABEL
System Name
ZyNOS F/W
Version
Ethernet
Address
Hardware Monitor
Temperature
Unit
Temperature
Current
MAX
MIN
Threshold
Status
70
DESCRIPTION
This field displays the descriptive name of the switch for identification purposes.
This field displays the version number of the switch 's current firmware including the
date created.
This field refers to the Ethernet MAC (Media Access Control) address of the switch.
The switch has temperature sensors that are capable of detecting and reporting if the
temperature rises above the threshold. You may choose the temperature unit
(Centigrade or Fahrenheit) in this field.
MAC, CPU and PHY refer to the location of the temperature sensors on the switch
printed circuit board.
This shows the current temperature in degrees centigrade at this sensor.
This field displays the maximum temperature measured at this sensor.
This field displays the minimum temperature measured at this sensor.
This field displays the upper temperature limit at this sensor.
This field displays Normal for temperatures below the threshold and Error for those
above.
Chapter 7 Basic Setting