Figure 34 Vlan: Static Vlan; Table 16 Vlan: Static Vlan - ZyXEL Communications ES-4124 User Manual

ES-4124 User's Guide

Figure 34 VLAN: Static VLAN

The following table describes the related labels in this screen.

Table 16 VLAN: Static VLAN

LABEL
ACTIVE
Name
VLAN Group ID
Port
*
Control
Tagging
86
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes. This name
consists of up to 64 printable characters; spaces are allowed.
Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select Normal for the port to dynamically join this VLAN group using GVRP. This is
the default selection.
Select Fixed for the port to be a permanent member of this VLAN group.
Select Forbidden if you want to prohibit the port from joining this VLAN group.
Select TX Tagging if you want the port to tag all outgoing frames transmitted with
this VLAN Group ID.
Chapter 8 VLAN