Table 11 Ip Setup - ZyXEL Communications ES-4124 User Manual

The following table describes the labels in this screen.

Table 11 IP Setup

LABEL
Default
Gateway
Domain Name
Server
Default
Management
Management IP Address
Use these fields to set the settings for the out-of-band management port.
IP Address
IP Subnet
Mask
Default
Gateway
Apply
Cancel
IP Interface
Use these fields to create or edit IP routing domains on the switch.
IP Address
IP Subnet
Mask
VID
Add
Cancel
Index
IP Address
Subnet Mask
VID
Chapter 7 Basic Setting
DESCRIPTION
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. Enter a domain name server IP address in order to be able to
use a domain name instead of an IP address.
Specify which traffic flow (In-Band or Out-of-band) the switch is to send packets
originating from itself (such as SNMP traps) or packets with unknown source.
Select Out-of-band to have the switch send the packets to the management port
labelled MGMT. This means that device(s) connected to the other port(s) do not
receive these packets.
Select In-Band to have the switch send the packets to all ports except the
management port (labelled MGMT) to which connected device(s) do not receive these
packets.
Enter the out-of-band management IP address of your switch in dotted decimal
notation. For example, 192.168.0.1.
Enter the IP subnet mask of your switch in dotted decimal notation for example
255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.0.254
Click Apply to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
Enter the IP address of your switch in dotted decimal notation for example
192.168.1.1. This is the IP address of the switch in an IP routing domain.
Enter the IP subnet mask of an IP routing domain in dotted decimal notation. For
example, 255.255.255.0.
Enter the VLAN identification number to which an IP routing domain belongs.
Click Add to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays IP address of the switch in the IP domain.
This field displays the subnet mask of the switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the switch.
ES-4124 User's Guide
77