Chapter 3 Hardware Overview; Panel Connections; Figure 8 Front Panel; Table 1 Panel Connections - ZyXEL Communications ES-4124 User Manual

This chapter describes the front panel and rear panel of the switch and shows you how to make
the hardware connections.

3.1 Panel Connections

The figure below shows the front panel of the switch.

Figure 8 Front Panel

LEDs
The following table describes the ports on the panels.

Table 1 Panel Connections

CONNECTOR
24 10/100
Mbps RJ-45
Ethernet Ports
Two 100/1000
Mbps RJ-45
Gigabit Ports
Two Dual
Personality
Interfaces

Chapter 3 Hardware Overview

Hardware Overview
10/100 Mbps Ethernet Ports
DESCRIPTION
Connect these ports to a computer, a hub, an Ethernet switch or router.
Connect these Gigabit Ethernet ports to high-bandwidth backbone network Ethernet
switches or use them to daisy-chain other switches.
Each interface has one 1000 Base-T copper RJ-45 port and one Small Form-Factor
Pluggable (SFP) fiber port, with one port active at a time.
• 2 100/1000 Mbps RJ-45 Gigabit Ports:
Connect these Gigabit Ethernet ports to high-bandwidth backbone network
Ethernet switches.
• 2 Mini-GBIC Ports:
Use mini-GBIC transceivers in these slots for fiber-optic connections to backbone
Ethernet switches.
C
H A P T E R
RJ-45 Gigabit Ports for stacking
RJ-45 Gigabit / Mini-GBIC
Dual Personality Interfaces
ES-4124 User's Guide
3
Console Port
Management Port
39