Figure 109 Vrrp Configuration: Ip Interface; Table 79 Vrrp Configuration: Ip Interface - ZyXEL Communications ES-4124 User Manual

ES-4124 User's Guide
Click IP Application, VRRP and click the Configuration link to display the VRRP
Configuration screen as shown next.
Note: You can only configure VRRP on interfaces with unique VLAN IDs.
Routing domains with the same VLAN ID are not displayed in the table
indicated.

Figure 109 VRRP Configuration: IP Interface

The following table describes the labels in this screen.

Table 79 VRRP Configuration: IP Interface

LABEL
Index
Network
Authentication Select None to disable authentication. This is the default setting.
Key
208
DESCRIPTION
This field displays the index number of an entry.
This field displays the IP address and number of subnet mask bit of an IP domain.
Select Simple to use a simple password to authenticate VRRP packet exchanges on
this interface.
When you select Simple in the Authentication field, enter a password key (up to eight
printable ASCII character long) in this field.
Chapter 31 VRRP