Configure Multiple Rapid Spanning Tree Protocol; Figure 47 Mrstp: Configuration - ZyXEL Communications ES-4124 User Manual

ES-4124 User's Guide
Table 26 Rapid Spanning Tree Protocol: Status (continued)
LABEL
Forwarding Delay
(second)
Cost to Bridge
Port ID
Topology Changed
Times
Time Since Last
Change

11.5 Configure Multiple Rapid Spanning Tree Protocol

To configure MRSTP, select MRSTP in the Advanced Application, Spanning Tree
Protocol screen. See

Figure 47 MRSTP: Configuration

108
DESCRIPTION
This is the time (in seconds) the root switch will wait before changing states (that
is, listening to learning to forwarding).
This is the path cost from the root port on this switch to the root switch.
This is the priority and number of the port on the switch through which this switch
must communicate with the root of the Spanning Tree.
This is the number of times the spanning tree has been reconfigured.
This is the time since the spanning tree was last reconfigured.
Section 11.1 on page 101 for more information on MRSTP.
Chapter 11 Spanning Tree Protocol