Note: When you use the
file index number, the switch saves the changes to the configuration file the
switch is currently using.
35.6.2 Resetting to the Factory Default
Follow the steps below to reset the switch back to the factory defaults.
1 Enter
erase running config
2 Enter
write memory
reset the second configuration file, use the
specified index number.
The following example resets both configuration files to the factory default settings.
sysname# erase running-config
sysname# write memory
sysname# write memory 2
Chapter 35 User and Enable Mode Commands
command without specifying a configuration
write memory
to reset the current running configuration.
to save the changes to the current configuration file. If you want to
write memory
ES-3148 User's Guide
command again with the
269