Table 110 Command Summary: config-vlan Commands (continued)
COMMAND
name <name-str>
no
normal <port-
list>
untagged <port-
list>
42.12 mvr Commands
The following table lists the
Table 111 Command Summary: mvr Commands
COMMAND
mvr <1-
4094>
exit
group <name-str>
start-address
<ip> end-address
<ip>
inactive
mode <dynamic|
compatible>
Chapter 42 Introducing Commands
default gateway
<ip-address>
fixed <port-list>
forbidden <port-
list>
inactive
ip address <ip-
address> <mask>
ip address
default-gateway
untagged <port-
list>
commands in configuration mode.
mvr
ES-4124 User's Guide
DESCRIPTION
Sets the default gateway IP
address in this VLAN.
Specifies a name for
identification purposes.
Sets fixed port(s) to normal
port(s).
Sets forbidden port(s) to normal
port(s).
Enables the specified VLAN.
Deletes the IP address and
subnet mask from this VLAN.
Deletes the default gateway from
this VLAN.
Specifies the port(s) you want to
tag all outgoing frames
transmitted with this VLAN Group
ID.
Specifies the port(s) to
dynamically join this VLAN group
using GVRP
Specifies the port(s) you don't
want to tag all outgoing frames
transmitted with this VLAN Group
ID.
DESCRIPTION
Enters the MVR (Multicast
VLAN Registration)
configuration mode.
Exist from the MVR
configuration mode.
Sets the multicast group range
for the MVR.
Disables MVR settings.
Sets the MVR mode (dynamic
or compatible).
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
PRIVILEGE
13
13
13
13
13
295