ZyXEL Communications ES-4124 User Manual page 125

Table 35 Link Aggregation Control Protocol: Configuration (continued)
LABEL
Port
*
Group
LACP Timeout Timeout is the time interval between the individual port exchanges of LACP packets in
Apply
Cancel
Chapter 15 Link Aggregation
DESCRIPTION
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Select the trunk group to which a port belongs.
order to check that the peer port in the trunk group is still up. If a port does not respond
after three tries, then it is deemed to be "down" and is removed from the trunk. Set a
short timeout (one second) for busy trunked links to ensure that disabled ports are
removed from the trunk group as soon as possible.
Select either 1 second or 30 seconds.
Click Apply to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields.
ES-4124 User's Guide
123