Enable Mode; Table 106 Command Summary: Enable Mode - ZyXEL Communications ES-4124 User Manual

Table 105 Command Summary: User Mode (continued)
COMMAND
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
help
tracerout <ip|host-name>
e
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help
ssh <1|2> <[user@]dest-
ip>

42.11.2 Enable Mode

The following table describes the commands available for Enable mode.

Table 106 Command Summary: Enable Mode

COMMAND
baudrate
<1|2|3|4|5
>
boot config <index>
configure
copy running-config
tftp <ip>
<remote-file>
running-config
interface port-
channel <port>
<port-list>
running-config
interface port-
channel <port>
<port-list>
tftp
Chapter 42 Introducing Commands
DESCRIPTION
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
Displays command help information.
Determines the path a packet takes to a device.
Determines the path a packet takes to a device in a
VLAN.
Displays command help information.
Connects to an SSH server with the specified SSH
version.
DESCRIPTION
Changes the console port speed.
Choices are 1 (9600), 2 (19200),
3(38400), 4 (57600) and 5
(115200).
Restarts the system with the
specified configuration file.
Accesses Configuration mode.
See
Backs up running configuration to
the specified TFTP server with the
specified file name.
Clones (copies) the attributes from
the specified port to other ports.
Copies the specified attributes
[bandwidth-
from one port to other ports.
limit ....]
Restores configuration with the
config <index>
specified filename from the
<ip> <remote-
specified TFTP server to the
file>
specified configuration file on the
router.
ES-4124 User's Guide
Section 42.11.3 on page 273.
PRIVILEGE
0
0
0
0
0
0
PRIVILEGE
13
13
13
13
13
13
13
267