ZyXEL Communications ES-4124 User Manual page 286

ES-4124 User's Guide
Table 107 Command Summary: Configuration Mode (continued)
COMMAND
284
DESCRIPTION
Enables MD5 authentication for
area <area-id>
the area.
authentication
message-digest
Sets the cost to the area.
area <area-id>
default-cost
<0-16777214>
Sets a descriptive name for the
area <area-id>
area for identification purposes.
name <name>
area <area-id> Enables and sets the area as a
stub area.
stub
Sets the stub area not to send
area <area-id>
any LSA (Link State
stub no-
Advertisement).
summary
Sets the virtual link ID information
area <area-id>
for the area.
virtual-link
<router-id>
Enables simple authentication
area <area-id>
and sets the authentication key
virtual-link
for the specified virtual link in the
<router-id>
area.
authentication
-key <key>
area <area-id> Sets the virtual link to use the
same authentication method as
virtual-link
the area.
<router-id>
authentication
-same-as-area
Enables MD5 authentication and
area <area-id>
sets the key ID and key for the
virtual-link
virtual link in the area.
<router-id>
message-
digest-key
<keyid> md5
<key>
Sets a descriptive name for the
area <area-id>
virtual link for identification
virtual-link
purposes.
<router-id>
name <name>
Leaves the router OSPF
exit
configuration mode.
Creates an OSPF area.
network <ip-
addr/bits>
area <area-id>
Removes the specified area.
no area <area-
id>
no area <area- Sets the area to use no
authentication (None).
id>
authentication
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
Chapter 42 Introducing Commands