ZyXEL Communications ES-4124 User Manual page 287

Table 107 Command Summary: Configuration Mode (continued)
COMMAND
Chapter 42 Introducing Commands
DESCRIPTION
Sets the area to use the default
no area <area-
cost (15).
id> default-
cost
Disables stub network settings in
no area <area-
the area.
id> stub
Sets the area to send LSAs (Link
no area <area-
State Advertisements).
id> stub no-
summary
no area <area- Resets the authentication
settings on this virtual link.
id> virtual-
link <router-
id>
authentication
-key
Resets the authentication
no area <area-
settings on this virtual link.
id> virtual-
link <router-
id> message-
digest-key
Resets the authentication
no area <area-
settings on this virtual area.
id> virtual-
link <router-
id>
authentication
-same-as-area
Deletes the virtual link from the
no area <area-
area.
id> virtual-
link <router-
id>
Deletes the OSPF network.
no network
<ip-addr/bits>
Sets the switch not to learn RIP
no
routing information.
redistribute
rip
Sets the switch not to learn static
no
routing information.
redistribute
static
Sets the switch to learn RIP
redistribute
routing information which will use
rip metric-
the specified metric information.
type <1|2>
metric <0-
65535>
Sets the switch to learn static
redistribute
routing information which will use
static metric-
the specified metric information.
type <1|2>
metric <0-
65535>
ES-4124 User's Guide
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
285