Daikin ETSX16E Installer's Reference Manual page 196

10 | Configuration
10.5.7 User settings
Installer reference guide
196
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
Example: setpoint (T )≤maximum heat pump temperature–[6‑01] (T
U
T
DHW
T
50
HP MAX
T =T
45
U HP OFF
T
43
HP ON
40
30
20
HP
10
5
HP Heat pump. If heating up time by the heat pump takes too long, auxiliary heating by
the backup heater can take place
T Maximum heat pump temperature at sensor in storage tank
HP MAX
T Heat pump OFF temperature (T
HP OFF
T Heat pump ON temperature (T
HP ON
T Domestic hot water temperature
DHW
T User setpoint temperature (as set on the user interface)
U
t Time
INFORMATION
The maximum heat pump temperature depends on the ambient temperature. For
more information, see the operation range.
WD curve type
There are 2 methods to define the weather-dependent curves:
▪ 2-points (see "10.4.2 2-points
▪ Slope-Offset (see
In [2.E] WD curve type, you can choose which method you want to use.
In [5.E] WD curve type, the chosen method is shown read-only (same value as in
[2.E]).
# Code
[2.E] / [5.E] N/A
Overview
The following items are listed in the submenu:
7
Space heating/cooling
Tank
User settings
Information
Installer settings
[6-00]
t
−[6-01])
HP MAX
−[6-00])
HP OFF
4
curve" [ 157])
"10.4.3 Slope-offset curve" [
▪ 0: 2-points
▪ 1: Slope-Offset
[7] User settings
[7.1] Language
[7.2] Time/date
[7.3] Holiday
[7.4] Quiet
[7.5] Electricity price
[7.6] Gas price
–[6‑01])
HP MAX
4
158])
Description
EPRA14~18D + ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH₂O
4P679467-1D – 2023.11