Daikin ETSX16E Installer's Reference Manual page 17

EPRA14~18D + ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH₂O
4P679467-1D – 2023.11
Mounting the outdoor unit (see
WARNING
Fixing method of the outdoor unit MUST be in accordance with the instructions from
this manual. See
CAUTION
To avoid injury, do NOT touch the air inlet or aluminium fins of the unit.
WARNING
Rotating fan. Before powering ON or servicing the outdoor unit, make sure that the
discharge grille covers the fan as protection against a rotating fan. See:
▪
"7.3.6 To install the discharge
▪
"7.3.7 To remove the discharge grille, and put the grille in safety
Mounting the indoor unit (see
WARNING
Fixing method of the indoor unit MUST be in accordance with the instructions from
this manual. See
Opening and closing the units (see
DANGER: RISK OF ELECTROCUTION
Do NOT leave the unit unattended when the service cover is removed.
DANGER: RISK OF ELECTROCUTION
DANGER: RISK OF BURNING/SCALDING
Piping installation (see
WARNING
The field piping method MUST be in accordance with the instructions from this
manual. See "8 Piping
DANGER: RISK OF ELECTROCUTION
During the filling process, water can escape from any leaking point and can cause an
electrical shock if it comes into contact with live parts.
▪
Before the filling process, de-energise the unit.
▪
After the first filling and before switching on the unit with the mains switch, check
whether all electric parts and connection points are dry.
In case of freeze protection by glycol:
3 Specific installer safety instructions
|
"7.3 Mounting the outdoor
"7.3 Mounting the outdoor
4
grille" [ 80]
"7.4 Mounting the indoor
"7.4 Mounting the indoor unit" [
"7.2 Opening and closing the
4
"8 Piping installation" [
4
installation" [ 86].
unit" [ 4 76])
4
unit" [ 76].
position" [
4
unit" [ 84])
4 84].
units" [
86])
Installer reference guide
4
82]
4 71])
17