Parameters/
Setup
You can setup your machine as you like depending
on the use. You will find in this chapter description
of the functions.
You can print the functions guide and the available
setup of your multifunction machine.
Your machine is continuously being
updated, new functions are regularly
made available.
To
benefit,
download the last updates.
U. S. regulations require that every fax
include the date, time it is sent, and the
name and fax number of the sender.
Date/Time
At any moment you may change the date and time
on your multifunction machine.
21 - SETUP / DATE/TIME
1 Press
, enter 21 using the keypad. Confirm
with OK.
2 Enter the numbers of the required time and
date
one
after
November
8
0 8 1 1 0 4 0 9 3 3)
confirm.
3 To exit this menu, press
Your fax number/Your name
Your multifunction machine will print out your fax
number and your name on each document it
transmits if you save these settings.
To benefit from this feature, you must
set
SENDING
(Technical Parameters, page 31).
22 - SETUP / NUMBER/NAME
1 Press
, enter 22 using the keypad. Confirm
with OK.
2 Enter your fax number (20 digits max.) and
press OK to confirm.
3 Enter your name (20 characters max) then
visit
our
website
another
(for
example
2004
at
9h33,
press
and
press
OK
.
HEADER
to
WITH
press OK to confirm.
For example, if you want to type the letter C,
press the key C until it appears on the
screen.
4 To exit this menu, press
Type of network
You can connect your fax to either a PSTN or a
private network such as private automatic branch
exchange (PABX). You must select the network
which is in use.
To select the type of network:
and
251 - SETUP / TEL. NETWORK / NETWORK TYPE
1 Select option PABX or PSTN then confirm
your choice with OK.
2 To exit this menu, press
Geographical settings
These settings will enable you to use your machine
in
different
preset
languages.
Country
By choosing a country, you initialise:
• the settings for the public telephone network,
• the language by default.
To select the country:
to
201 - SETUP / GEOGRAPHICAL / COUNTRY
1 Select the required option and press the OK
key to confirm.
2 To exit this menu, press
Network
This setting enables you to manually set the type
of public telephone network (PSTN) for a country,
so that your machine can communicate over the
public telephone network in compliance with the
applicable standards.
By default, setting a country using the
OK command automatically sets the type of
PSTN to use in the selected country.
- 28 -
B2520 / B2540
.
.
countries
using
different
.
201