Oki B2520 User Manual page 41
Oki b2520: user guide
Hide thumbs
Also See for B2520:
- Brochure & specs (2 pages) ,
- Quick start (2 pages) ,
- Replacement instructions (2 pages)
Table of Contents
Advertisement
1 Type in
, select the menu SETUP using the
keys
or
and confirm with OK.
2 Select WLAN using the keys
confirm with OK.
3 Select PARAMETERS using the keys
and confirm with OK.
4 Select IP ADDRESS using the keys
and confirm with OK.
5 The number of your IP address will appear in
the format 000.000.000.000. Enter the
new IP address for your machine in the
format displayed and confirm with OK.
6 Exit this menu by pressing the
2823 - SETUP / WLAN / PARAMETERS /
SUBNET MASK
1 Type in
, select the menu SETUP using the
keys
or
and confirm with OK.
2 Select WLAN using the keys
confirm with OK.
3 Select PARAMETERS using the keys
and confirm with OK.
4 Select SUBNET MASK using the keys
and confirm with OK.
5 The number of your subnet mask will appear
in the format 000.000.000.000. Enter the
new submask of your machine in the format
displayed and confirm with OK.
6 Exit this menu by pressing the
2824 - SETUP / WLAN / PARAMETERS /
GATEWAY
1 Type in
, select the menu SETUP using the
keys
or
and confirm with OK.
2 Select WLAN using the keys
confirm with OK.
3 Select PARAMETERS using the keys
and confirm with OK.
4 Select GATEWAY using the keys
confirm with OK.
5 The number of your gateway will appear in
the format 000.000.000.000. Enter the
new gateway for your machine in the format
displayed and confirm with OK.
6 Exit this menu by pressing the
2825 - SETUP /WLAN / PARAMETERS / SSID
1 Type in
, select the menu SETUP using the
keys
or
and confirm with OK.
2 Select WLAN using the keys
confirm with OK.
3 Select PARAMETERS using the keys
and confirm with OK.
4 Select SSID using the keys
confirm with OK.
5 The name of your network will appear on the
screen. Enter the new name of your network
and confirm with OK.
or
and
6 Exit this menu by pressing the
or
2826 - SETUP / WLAN / PARAMETERS / MODE
or
1 Type in
keys
2 Select WLAN using the keys
confirm with OK.
3 Select PARAMETERS using the keys
and confirm with OK.
key
.
4 Select MODE using the keys
confirm with OK.
5 The symbol >>, tells you that your network
is in active mode.
6 Select one of the modes and confirm with
OK.
- If you choose the AD-HOC MODE, the
or
and
or
7 Exit this menu by pressing the
or
key
.
or
and
2827 - SETUP / WLAN / PARAMETERS /
SECURITY
or
This parameter allows you to make your network
or
and
secure.
1 Type in
keys
2 Select WLAN using the keys
confirm with OK.
3 Select PARAMETERS using the keys
key
.
and confirm with OK.
4 Select SECURITY using the keys
and confirm with OK.
5 Choose WITH or WITHOUT and confirm by
OK.
If you choose WITH, enter a password:
or
and
- In a 64 bit security configuration, the
password must contain five characters
or
exactly.
- In a 128 bit security configuration, the
or
and
password must contain 13 characters
exactly.
- 41 -
B2520 / B2540
, select the menu SETUP using the
or
and confirm with OK.
sub-menu CHANNEL will appear; enter a
number between 1 and 13 and confirm
with OK.
In an AD-HOC network, the devices
communicate directly with each other
without passing through an access
point. The speed of communication
across the whole AD-HOC radio network
is as fast as the weakest connection in
the network. The speed of
communication is also dependent on
spatial distance between transmitter
and receiver, as well as the number of
barriers, such as walls or ceilings.
, select the menu SETUP using the
or
and confirm with OK.
key
.
or
and
or
or
and
key
.
or
and
or
or
Advertisement
Table of Contents
