Parameters/Setup; Print The Functions Guide; Print The List Of Setups; Lock The Keyboard - Oki B2500 MFP User Manual

Parameters/
Setup
You can setup your machine as you like depending
on the functions you need. This chapter describes
the functions.
You can print the functions guide and the available
setup of your multifunction machine.

Print the functions guide

Press on ▼ and enter 51 on the digital keypad. The
functions guide prints.

Print the list of setups

Press on ▼, enter 54 with the digital keypad. The
printing of the list of setups starts.

Lock the keyboard

This function prevents non-authorized people from
accessing the machine. An access code will be
required every time someone wants to use the
device. After each use, the device will lock
automatically.
▼ 811 - ADVANCED FCT/LOCK/LOCKING
CODE
1
Press on ▼, enter 811 with the digital
keyboard.
2
Enter your lock code (4 digits) with the
keyboard, confirm with
3
Enter again your lock code (4 digits) with the
keyboard, confirm with
4 Quit this menu by pressing the
If a code is already registered, enter the old
code before typing the new one.

Activate the keyboard lock

Every time you use your machine, you will have to
enter your code.
▼ 812 - ADVANCED FCT/LOCK/LOCK
KEYBD.
1
Press on ▼, enter 812 with the keyboard.
2 Enter the lock code and confirm with
3 With the buttons ▼ or ▲, choose WITH and
OK
confirm with .
4
Quit this menu by pressing the
OK
.
OK
.
button.
OK .
button.
B2500 MFP User's Guide
20

Read the counters

You can view the activity counters for your
machine at any time.
This function shows you the number of scanned
pages.
▼ 823 - ADVANCED FCT/COUNTERS/
SCANNED PAGE
1
Press on ▼, enter 823 with the keyboard.
2
The number of scanned pages appears on the
screen.
3
Quit this menu by pressing the
This function shows you the number of printed
pages.
▼ 824 - ADVANCED FCT/COUNTERS/
PRINTED PG
1
Press on ▼, enter 824 with the keyboard.
2
The number of printed pages appears on the
screen.
3
Quit this menu by pressing the

Display the consumables status

You can read at any time the remaining toner in
the cartridge. This level appears in percentage.
▼ 86 - ADVANCED FCT/CONSUMABLES
1
Press on ▼, enter 86 with the keyboard.
2
The available toner percentage appears on the
screen.
3
Quit this menu by pressing the

Calibrate your scanner

You can do this operation when the quality of
photocopied documents is not satisfactory
anymore.
▼ 80 - ADVANCED FCT/CALIBRATION
1
Press on ▼, enter 80 with the keyboard,
OK
confirm with .
2
The scanner is triggered and a calibration is
done automatically.
3 At the end of the calibration, the machine
comes back to the screen saver .
Switches your machine to
standby mode (ECO)
The machine will switch to standby mode when not
being used. You can choose the time before the
machine switches to stand by (it is set in minutes).
B2500
button.
button.
button.