Cartridge Installation - Oki B2520 User Manual

2 Push the lower panel down until it clicks.
3 Setup the back side feed cassette stop by
pushing the "PUSH" lever (A).
Then adjust the lateral paper guides to the
paper format by pushing lever (B) located on
the left guide. Adjust the length paper guide
to the paper format by pushing lever (C).
4 Take a paper stack, pull the paper off and
align it on a flat surface.
5 Put the paper stack in the feed cassette (ex:
250 sheets of 20 lb. (80 g/m²) paper).
6 Put the feed cassette back in its location.

Cartridge installation

Refer to the section Consumables on page 72
1 Stand in front of the machine.
2 Push the left and right sides of the cover and
pull it towards you at the same time.
3 Unpack the new cartridge. Gently roll the
cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge. Thoroughly
rolling the cartridge will assure the
maximum copies per cartridge.
4 Insert the cartridge in its slot by pushing it
until it clicks (last move down) as shown on
the picture below.
5 Close the cover.
- 14 -
B2520 / B2540