Parameters/Setup; Language; Technical Parameters; Printing The Functions Guide - Oki MB 260 User Manual

MB260
Parameters/
Setup
You can setup your machine as you like depending on the
use. You will find in this chapter description of the
functions.
You can print the functions guide and the available setup
of your multifunction machine.

Language

This setting enables you to choose the menu language of
your choice. By default, the multifunction machine is set
to English.
To select the language:
203 - SETUP / GEOGRAPHICAL / LANGUAGE
1 Press , enter 203 using the keypad.
2 Select the required language using
press the OK key to confirm.
3 To exit this menu, press

Technical Parameters

As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
1 Press , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys
settings by following the table below and press OK.
Parameter
Choosing the printer standby
8 - Eco energy
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
Note: you can also access this
parameter by pressing the
80 - Toner save Makes printing lighter to save toner
cartridge ink.
90 - RAW Port RAW network print port
connection.
and , then
.
29 - SETUP / TECHNICALS
or , modify the parameter
Signification
key from the idle screen.
Parameter
91 - Printer error Time-out before document being
timeout
printed is deleted following a print
error in PC print mode.
92 - Printer wait Wait time-out for data from PC
timeout
before the task is deleted in PC
print.
93 - Replace format Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
96 - NBR. WEP Number of WEP keys allowed
Keys
(from 1 to 4).

Printing the functions guide

The printing is not possible on A5
Important
(or Statement) paper format.
Press , enter 51 using the keypad.
The printing of the functions guide starts.
You can also access the PRINT menu
Note
by pressing the

Print the list of setups

The printing is not possible on A5
Important
(or Statement) paper format.
To print the list of setups:
Press , enter 56 using the keypad.
The printing of the list of setups starts.
You can also access the PRINT menu
Note
by pressing the

Lock the machine

This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
Before that you have to enter a lock code.
811 - ADVANCED FCT / LOCK / LOCKING CODE
1 Press , enter 811 using the keypad.
- 22 -
Signification
51 - PRINT / FUNCTIONS LIST
button.
56 - PRINT / SETUP
button.