Copy
Your machine has the function to make one or
more copies.
You can also setup several parameters in order to
make copies at your will.
Simple copy
In this case, the default parameters are applied.
1 Place the document to be copied in the
automatic document feeder, printed face on
the top.
or
Place the document to be copied face down
on the glass, respecting the indications
around the glass.
2 Press the
made using the default parameters.
ECO mode copy
The ECO mode enables you to reduce the amount
of toner consumed on the page so as to save your
printing costs.
When
the
ECO
mode
consumption is reduced and the print density
becomes lighter.
1 Place the document to be copied in the
automatic document feeder, printed face on
the top.
or
Place the document to be copied face down
on the glass, respecting the indications
around the glass.
2 Press the
button.
3 Press the
button.
ECO
Advanced copying
The sophisticated copy allows to do custom setups
for the current copy.
1 Place the document to be copied in the
automatic document feeder, face printed on
the top.
or
Place the document to be copied face down
on the glass, respecting the indications
around the glass.
After step 1, you can directly enter
the number of copies with the
numerical keypad and press the OK
button to validate. Then refer to step
4.
button twice. The copy is
is
used,
the
toner
2 Press the
3 Enter the number of copies that you want
and confirm with the OK button.
4 Choose the paper tray AUTOMATIC or
MANUAL with the buttons
confirm with the OK button.
5 Choose with the buttons
option (see examples below) depending on
the copy mode that you want:
- Combined mode (document feeder):
1 Page to 1, 2 Pages to 1, or
4 Pages to 1.
- Poster mode (flat-bed scanner):
1 Page to 1, 1 Page to 4 or 1 page to 9.
Confirm with the OK button.
6 Adjust the desired zoom level, from 25%
TO 400% with the buttons
with the OK button (only available in
- 17 -
B2520 / B2540
button.
or
or
the printing
or
, confirm
, then