Communication Error Codes; General Codes - Oki B2520 User Manual

Communication error codes

The communication error codes appear in the logs
and transmission reports.

General codes

Code 01 - Busy or no fax answer
This code appears after 6 unsatisfactory attempts.
Call later.
Code 03 - User break
A communication has been stopped by the user
pressing the key .
Code 04 - Non programmed number
A number saved as
abbreviated number is not valid, check it.
(Example: a delayed
programmed with a one-touch key and this key
has been deleted in the meantime).
Code 05 - Scanning default
An incident occurred with the scanner, for
example, the sheet is jammed.
Code 06 - Printer default
An incident occurred in the printer: no paper,
paper jam, opened cover... In the reception mode,
this incident appears
parameter is switched to W
Code 07 - Disconnected
The link has been cut (bad line). Check the
number and try again.
Code 08 - Quality
The document you sent was not well received.
Contact your subscriber to see if you need to send
again.
Code 0A - No document to be polled
You tried to poll a document from a subscriber who
had not prepared his document (no deposit) or the
password entered was incorrect.
Code 0B - Wrong number of pages
There is a difference between the number of pages
indicated during preparation for the transmission
and the number of pages sent. Check the number
of pages in the document.
Code 0C - Received document error
Ask the subscriber who called you to check the
length of his document (it may be too long to be
completely received).
Code 0D - Transmission failed
Ask the sender to resend the document.
Code 13 - Memory full
Your fax can no longer receive since its memory is
full. There are too many received unprinted
documents or too many documents in the
transmission line.
Print the received documents and delete or
transmit immediately the documents in the
transmission line.
Code 14 - Memory full
Received document memory full. Print all received
documents.
Code 15 - Unknown mailbox number
You wish to deposit a document in a subscriber's
mailbox. The mailbox number does not exist.
a one-touch key or
transmission was
only if the reception
P .
ITHOUT APER
Code 16 - No Relay Bcst list Nr x
You requested a document relay from a remote
fax but the fax has not programmed the list of
subscribers requested.
Code 17 - Unknown mailbox number
You wish to recover
subscriber's mailbox. The mailbox number does
not exist.
Code 18 - Relay Bcst impossible
You requested a document relay from a remote
fax which does not have the relay broadcast
function.
Code 19 - Subscriber has stopped
The communication has been stopped by your
subscriber. (Example: a fax wanted to poll your
fax but there is no document deposited).
Code 1A - Disconnected
The transmission has not started. The telephone
line is busy.
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend
the document.
Code 50 - Server error
A communication error occured during data
transmission.
- 70 -
B2520 / B2540
a document from a