Turning Department Management On; Using Department Codes - Muratec MFX-1430 User Manual

Turning department management On

1
Press [Setting], [Management], [Next], [Depart. Management], [Setting].
2
Press [Copy] to set the department management status for copying, and/or
press [Fax] for faxing.
[ON] and [OFF] will toggle each time you press the key. To use department
management, set it to [ON].

Using department codes

To use this function, make sure:
• The department code has been registered.
• Each user/department knows their department code.
Transmitting faxes
1
Set the document (See page 1-25).
2
Press [Fax] to display the Fax standby mode.
3
Specify the destination.
4
Press [Start].
5
Use [
6
Press [Enter].
Press [Reset] to reset the sending settings.
] [ ] or the numeric keys to enter the department code.
R
ESTRICTING USE OF THE MACHINE
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
11-17