Specifying The Document Size To Copy - Muratec MFX-1430 User Manual

Specifying the document size to copy

If the document size exceeds the size set, only the default scan range will be copied.
To insure that your job is scanned properly, please adjust the scan range.
1
Set the document.
2
(1) Press [COPY] to display the Copy standby mode.
(2) Press [Others].
3
Press [Doc.Size].
NOTE: You can assign [Doc.Size] to the soft key. See "Soft keys" on pages 10-2 to 10-6.
4
(1) Select the size of the document to be copied.
(2) Press [Enter] twice.
5
Press [Start].
C 7-27
OPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
AI