Fax & Copy - Muratec MFX-1430 User Manual

Fax & Copy
Documents can be faxed and copied simultaneously with just one scanning opera-
tion. This function is useful for internal communications when copies need to be
made after sending a fax.
NOTE: • If the copy protect is set to [ON], Fax&Copy cannot be used. (See page 11-22.)
• Resolution for Fax & Copy will be either Fine or S-Fine. (No other selections
are available.)
1
Set the document.
2
Press [FAX] to display the Fax standby mode.
3
Press [Others], [Fax&Copy].
NOTE: You can assign [Fax&Copy] to the soft key. See "Soft keys" on page 10-2.
4
Press [ON], and then [Enter].
5
Fax&Copy is now set. Press [Enter] again.
3-28 F
AXING