Changing Document Scan In Mid Scan (Mixed Transmission) - Muratec MFX-1430 User Manual

Changing Document Scan in Mid Scan (Mixed Transmission)

The document glass or the ADF can scan the document. Both scanning devices can
be used in combination, such as for a cover page and map, and transmitted at the
same time.
NOTE: Basics for scanning the next document
• To scan the next document, set the Next Doc setting to [Yes] while scanning
the current document.
• The ADF's default setting for Next Doc is [No]. To have the next document
scanned, press [Yes] while scanning the current document.
• For the document glass, the default setting for Next Doc is set to [Yes].
• If you set Next Doc to [No] during scanning, the transmission will begin after
scanning is completed.
ADF  Document glass
1
Set the document in the ADF.
2
(1) Press [FAX] to display the Fax standby mode.
(2) Specify the destination.
• Use the numeric keys to dial the number.
– or –
• Specify the destination using the address book. (See page 2-12)
– or –
• When specifying multiple destinations, use broadcast transmission (See page
3-24.) or call group dialing. (See page 2-14.)
Press [Reset] to cancel the settings.
3-10 F
AXING