Muratec MFX-1430 User Manual page 223

4
If you want to cancel a command, select the command you want to cancel.
The confirmation message will appear.
5
Press [Yes] to cancel the selected command. Otherwise, press [No].
NOTE: • If the selected command was being transmitted, communication will be can-
celed.
• You can cancel the destinations for broadcast transmission individually when
the broadcast command in progress (See "Reviewing or canceling parts of a
broadcast" on page 6-4.).
6
To cancel other command, repeat procedures from step 4.
Press [Reset] to return to the standby mode.
R
EVIEWING OR CANCELING COMMANDS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
6-3