Muratec MFX-1430 User Manual page 374

Message on the display
Enter the sub-address
Error
Feeder In Use
Follow Instruction A
Incorrect passcode
Invalid Address Book
Location!
Invalid characters have
been entered.
Invalid I.D.code
Invalid number!
Invalid Paper Size
Invalid parameters!
Jam Recover.
Set the document. Press
[Start].
From Page :
[Start] [Cancel]
Lamp error. Call for
service.
LDAP reference execu-
tion error
Link Path is required.
Load XXX paper
Load paper
Load paper for reception
Load paper in the
bypass tray
Load paper into the
XXX cassette
Macro in use
Mail transmission error
Memory full. Printing
will resume when mem.
is free.Press [OnLine]
to stop.
Memory overflow Rx
14-18 M
AINTENANCE
You tried to create an F-code box without entering a sub-address. Sub-address is a
required field.
The image transfer failed. Check the printed out "Check Massage" to identify the error.
There is a manual delayed transmission reserved in the ADF. Wait until the job is
finished, or cancel the delayed transmission by removing the document.
Follow the instruction that will be displayed on the screen to clean the charge wire.
The entered passcode is wrong. Enter the correct passcode.
A non-registered address book number is selected. Either choose another number or
manually dial the number.
You entered invalid characters. To register a Shortcut, insert the PC name between "//"
and "/". To register a File Name, special characters such as "\", "/", ":", "*", "?", "<", ">"
or "|" cannot be entered. To register NetBIOS characters other than the alphabet and
numbers between 1 to 9.
The F-code box I.D. code you entered is not valid. Try re-entering your F-code box I.D.
code.
You entered a number which is not valid for the current operation.
The selected paper is not suitable for duplex printing. Select other paper source. Select
plain paper in the size of Letter or Legal.
You entered an invalid value or pressed [Enter] without entering a value.
– or –
The advanced search failed due to an internal machine error. Check the LDAP server
setting, and try the search again. For more information about LDAP server set up, refer
to the "Network Guide".
You selected to continue the job. The machine is instructing you from which page to set
the document. Set the document again from that page that the machine is indicating
you and press [Start]. To cancel and finish the job, press[Cancel].
The scanner lamp is dim or not operating.
Make repeated copies to help evaporate any internal moisture. If that doesn't resolve
the problem, contact your Muratec dealer.
The advanced search failed due to an internal machine error. Try the search again.
You tried to register a shortcut without entering [Link]. To register a Folder or FTP
server shortcut, you should enter the [Link].
Load the paper specified by the machine.
There is no paper either in the cassette or in the bypass tray. Load paper.
The paper run out during fax reception. Load paper.
There is no paper either in the cassette or in the bypass tray. Load paper.
There is no paper in the XXX cassette. Load paper in it.
You cannot press [Macro Program] while you are registering a Macro.
The transmission failed. Check the printed out "Check Massage" to identify the error.
There is not enough memory to store the print job. Wait until some reserved jobs are
finished and the memory becomes free.
Memory has overflowed during the fax reception.
Press [Stop] to return the standby screen.
& T
ROUBLESHOOTING
Description / Solution