Muratec MFX-1430 User Manual page 94

Document glass  ADF
1
Set the document on the document glass.
2
(1) Press [FAX] to display the Fax standby mode.
(2) Specify the destination.
• Use the numeric keys to dial the number.
– or –
• Specify the destination using the address book. (See page 2-12)
– or –
• When specifying multiple destinations, use broadcast transmission (See page
3-24.) or call group dialing. (See page 2-14.)
Press [Reset] to cancel the settings.
3
Press [Start].
4
When scanning is completed, set the next document in the ADF.
5
Press [Next Doc]. Document scanning will begin.
6
Transmission will start when scanning has been completed.
• Press [Stop] to cancel the scan.
3-12 F
AXING