Management Settings; Accessing The Management Settings - Muratec MFX-1430 User Manual

Management settings

You can customize settings on your machine to match your needs.

Accessing the management settings

1
Press [Setting], [Management].
2
Set or change the selected items using [Prev] and [Next].
For details on each setting, refer to the following table:
3
When you are finished, press [Reset] to return to the standby mode.
The underlined settings are factory defaults.
Function
Network Set- You can configure the network settings to use your machine on the TCP/IP
tings network.
Soft Key You can change the "Soft keys" displayed in the standby mode.
Auto Reset This sets the period of time before the copy/fax/scanner display returns to the
Time standby mode.
Copy and Scanner screens
"Reset time"
"Reset After Scan" :Setting it to [ON] resets the resolution, resizing, and other
Fax screen
When the machine does not operate for a set period of time after faxing, the
selected settings are reset (returned to their original values). You can set the
reset time.
Description
:When the machine does not operate for a set period of
time after copying or scanning is completed, the selected
settings are reset (returned to their original values). The
reset time can be set.
settings after the document is scanned. Setting it to [OFF]
resets the values after the selected reset time has elapsed.
Setting
For details of network
settings, see "Network
Guide" contained in this
product.
See "Programming a soft
key" on page 10-5.
• Reset time
1 to 10 minutes:
3 minutes
• Reset After Scan
ON
OFF
• Reset time
1 to 10 minutes:
3 minutes
M S 12-11
ACHINE ETTINGS
1
2
3
4
5
6
7
8
9
10
11
12
13
AI