How To Dial Using A Call Group - Muratec MFX-1430 User Manual

How to dial using a call group

Sending a fax or e-mail using a call group
1
Set the document.
2
Press [FAX] to display the Fax standby mode.
3
Adjust the document resolution and contrast, if necessary.
4
Press [Others], [Group Tx].
NOTE: You can assign [Group Tx] to the soft key. See "Soft keys" on page 10-2.
5
(1) Press the group(s) you want to send to.
(2) Press [Enter] twice.
• If you want to edit the selected destination, press [Location] and edit it.
6
Press [Start].
• If you want to cancel the a transmission that is in progress, use the Review
Commands feature. See "Chapter 6 Reviewing or canceling commands".
2-16 U A
SING THE
B
DDRESS OOK