Initial Setup; Clearing Stored Settings - Muratec MFX-1430 User Manual

Initial setup

Clearing stored settings

Before using your machine, clear the built-in user data. This insures that the
memory will hold only your settings.
IMPORTANT: After specifying the initial settings, do not clear the memory again without
consulting your Muratec dealer.
To clear the machine's memory:
1
Press [Setting], [ ], [0], [2].
2
If you want to clear the memory, press [Yes].
If you do not want to clear the memory, press [No].
1-14 G S
ETTING TARTED