Installing The Simple-Swap Backplate - Lenovo ThinkServer TS200 Installation And User Manual
Lenovo thinkserver ts200: user guide
Hide thumbs
Also See for ThinkServer TS200:
- Hardware maintenance manual (298 pages) ,
- Installation and user manual (258 pages) ,
- Manual d’installation et d’utilisation (254 pages)
Table of Contents
Advertisement
11. Lift the simple-swap backplate out of the lower lip on the drive cage and set it
12. If you are instructed to return the simple-swap backplate, follow all packaging
Installing the simple-swap backplate
This procedure applies only to server models with the simple-swap SATA backplate
installed on the back of the hard disk drive cage.
To install the simple-swap backplate, complete the following steps.
1
Retaining tab
2
Drive cage release tab
3
Locating pins
4
Simple-swap backplate
5
Retaining latch
aside.
instructions, and use any packaging materials for shipping that are supplied to
you.
1. Position the bottom edge of the simple-swap backplate on the lower lip of the
drive cage.
Chapter 6. Installing and replacing customer replaceable units
79
Advertisement
Table of Contents
