Lenovo ThinkServer TS200 Installation And User Manual page 121

9. Remove the eight screws (seven in front and one in rear) 1 that secure the
system board to the chassis.
10. Slide the system board toward the front of the server to disengage the tabs on
the fan sink mounting bracket from the slots on the bottom of the chassis;
then, carefully lift the system board out of the server.
11. Remove the fan connector covers from fan connectors 1, 3, and 5 on the
system board. Then, put the fan connector covers aside for use later.
Chapter 6. Installing and replacing customer replaceable units
105