System Configuration; Accessing The Internet; Macintosh (230K) High Speed Script Installation; Installing The Script - 3Com 56K Command Reference Manual

System Configuration

Accessing the
Internet
Macintosh (230K)
High Speed script
installation

Installing the script

Also, if you aren't using AppleTalk® Remote Access (ARA), set AppleTalk
to Inactive (in Chooser).
The modem initialization string should be
For instructions about how to set up your Macintosh communications
software package, see the software installation instructions that came
with the software.
Accessing the Internet through an ISP requires the following software:
MacTCP or Open Transport (TCP/IP from the Control Panels menu),
which has probably already been installed on your Macintosh
SLIP or PPP dialing software
You can find public domain PPP dialers (such as MacPPP, FreePPP) on the
Internet.
To enable the 230K DTE support for the Business Modem and 25 mhz
Business Modem you first must install the Macintosh (230K) High Speed
Script and then configure Open Transport PPP.
1 Download the USRARA.HQX file.
This file can be found on the internet at
http://www.usr.com/home/online/ in the software library area. It can also
be downloaded from the BBS at 847-262-6000.
2 After the file is downloaded, it needs to uncompressed. When the file is
uncompressed the USRARA.SEA Folder appears.
3 Inside the USRARA.SEA folder is a readmefirst.txt file and the 3Com High
Speed script.
4 Move the script file to the following path C:\System\Extensions\ and
create a folder named Modem Scripts.
Once you place the script in the Modem Scripts folder you will have the
option to choose the 3Com High Speed in Open Transport PPP or ARA.
The script will attempt to talk to the modem at 230.4 port speed and if
this fails, it will attempt at the next lowest speed. This will continue until
Macintosh
.
AT&F1&D0
1-13