Octothorpe (#) Command Set - 3Com 56K Command Reference Manual

Octothorpe (#)
Command Set
Command Function
%Fn Remotely configure another device's data format.
%F0
%F1
%F2
%F3
%L= Set a local-access password.
%Pn= Disable password security (n=0 or n=1) when no character follows
the equal sign.
%Pn=s Set the following password (s) for viewing privileges only (n = 0),
or view and configuration privileges (n= 1).
%Pn? Display password n.
%S=n Access the security accounts. Does not disable security.
%T Enable the recognition of tone frequencies of analog dialing
devices.%T is meant primarily for use with network applications,
but may also be integrated into certain software programs. For
example, %T could be used in a security program to identify
incoming tone security codes.
To return the modem to Command mode, press any key or drop
the computer's or terminal's DTR signal. The modem responds OK
%V=PWn Assign the password in account n in your modem's security
account as your Autopass password
Command Function
#$ Display the help panels for the octothorpe (#) command set.
#CID=n Controls the caller ID settings.
#CID=0
#CID=1
#CID=2
#CID=3
#CID=4
#CID? Display the current caller ID settings.
#CID=? Display the caller ID actions that are available.

Octothorpe (#) Command Set

No parity, 8 data bits.
Mark parity, 7 data bits.
Odd parity, 7 data bits.
Even parity, 7 data bits.
Disable caller ID detection and reporting.
Enable caller ID with formatted output.
Enable caller ID with unformatted output.
Enable caller ID with formatted output and name
suppressed.
Enable caller ID but do not transmit the information
to your computer- retain it in the modem's memory.
B-13