Remote Configuration Commands - 3Com 56K Command Reference Manual

Depending on your access privileges, you can use the regular set of
Business Modem AT commands.
If you have this access privilege
View-only
View and Configure
CAUTION: Be careful not to send
connection!
Remote There are special commands that can be used only during a
Configuration remote-access session.
Commands
You can change the host Business Modem's serial port rate by using the
AT%Bn command.
To change the host
Business Modem's
serial port rate to
110 bps
300 bps
600 bps
1200 bps
2400 bps
4800 bps
Example: Sending
rate to 9600 bps.
You can use
Any of the inquiry (ATI) commands
Any of the Business Modem commands,
except those that cannot be used while
online (for example, ATD or ATA). You can
also use remote configuration commands.
See the next section for examples.
or
ATZ
To change the host
Business Modem's
Command serial port rate to
9600 bps
AT%B0
19200 bps
AT%B1
38400 bps
AT%B2
57600 bps
AT%B3
115200 bps
AT%B4
AT%B5
will change the Business Modem's serial port
AT%B6
Accessing the Host
or you will lose the
ATZ!
Command
AT%B6
AT%B7
AT%B8
AT%B9
AT%B10
9-5