Carrier Loss Redial - 3Com 56K Command Reference Manual

Carrier Loss Redial

For your modem to
Dial a number, wait 60 seconds for a connection, and
then hang up. Wait two seconds, then redial. Make a
maximum of 10 attempts.
To stop the repeating, press any key during the pause
between dial attempts. If you press any key while the
modem is dialing, that dial attempt is canceled but the
cycle will continue
Dial the last-dialed number and repeat it just as the >
command does. Also can be used to repeat any
command.
You can set the Business Modem to redial the last-dialed number after it
loses carrier (carrier is the signal maintained between two modems while
they are on line). This feature is useful for dialed-line connections that
operate unattended.
For your modem to
Disable carrier loss redial
Enable carrier loss redial
Wait n seconds between losing the connection and
redialing.
This command also defines the interval (in seconds)
between dialing attempts in the that the first attempt is
not successful.
Example: Sending
ATS44=20
the connection and redialing.
Carrier Loss Redial
Command
>
A>
Command
ATS69.1=0
ATS69.1=1
ATS44= n
sets a 20-second interval between losing
4-3