3Com 56K Command Reference Manual page 17

Step One: Determine if Dial-Up Networking is Installed
1 Click Start | Settings | Control Panel.
2 On the Control Panel, double-click on Network. The Network widow will
appear.
If Dial-Up Adapter Do this
Is listed
Is not listed
3 Return to the Control Panel and double-click on Add/Remove
Programs to open the Add/Remove Programs Properties window.
4 Click Windows Setup tab.
5 Double-click on Communications. The following window appears:
6 Click on Dial-Up Networking to check the box.
7 Click OK | OK.
Go to the section "Installing TCP/IP Support" to install Dial-Up
Networking.
Go to Step 3.
Windows 95/98 1-3