Entering Online Command Mode; Returning To Online Mode - 3Com 56K Command Reference Manual

3-2 C 3: M
HAPTER ODES OF
Entering Online
Command Mode
Returning to Online
Mode
O
PERATION
When the modem is in Online Mode, the only command it recognizes is
an escape code, or +++.
Revert to Command Mode without losing connections by sending
to the modem before establishing your connection.
ATS14.0=0
5 Wait one second after sending the last item of data
6 Type
+++
7 Wait for to appear before typing any data
OK
You can change the characters used to revert to Command Mode or the
wait time by resetting Register S2 or S12. For more information about
resetting these S-Registers, see Appendix A, S-Registers.
There are two ways to return online using the ATOn command.
.
If you want to
Return online
Return online and retrain
Example: Sending
experienced errors during a non-ARQ data transfer.
, will allow you to resynchronize if you
ATO1
Command
ATO0
ATO1