3Com 56K Command Reference Manual page 86

10-6 C 10: D S
HAPTER IAL ECURITY
6 Enable Dial Security.
WARNING: Before you enable Dial Security, you must set up an
administrative account and password. See Steps 1 & 2.
For your modem to enable
Autopass Dial Security
Dial Security with Password Prompting
(this also enables Autopass)
Dialback Security, enable Password
Prompting and enable Dialback in each
guest account
Example: Issuing
enable Password Prompting and Dialback for account 3, which has the
password corn.
You must use the &W command to save the settings for Enabling
Autopass Dial Security and Dial Security with Password Prompting. If you
don't, the next time you reset or power off the Business Modem, Dial
Security will be disabled.
If you need a reference when setting these command, you can use the
ATI10 command. See Appendix B, Alphabetic Command Summary for
more information about the ATI10 command.
7 Send or to activate the Dial Security settings!
ATZ ATZ!
Command
ATS53.0=1
ATS53.0=1.1=1
AT%An=password,y,y,y,phone
number
where n is the account number
See the figure in previous section,
Setting Up Dial Security for more
information.
AT%A3=corn,y,y,y,5551234
to your modem will