3Com 56K Command Reference Manual page 18

1-4 C 1: C
HAPTER ONNECTING TO
Y ISP
OUR
8 Insert your Windows 95/98 Setup diskette or CD-ROM when you are
prompted, and Windows 95/98 installs Dial-Up Networking.
Step Two: Installing Dial-Up TCP/IP Support
1 Click Start | Settings | Control Panel.
2 On the Control Panel, double-click on the Network to display the
Network window:
3 Determine if the TCP/IP Dial-Up Adapter is installed:
IF TCP/IP -> Dial-Up Adapter
Is not listed
Is listed
Step Three: Setting Up a Connection to Your ISP
1 Click Start | Programs | Accessories | Dial-Up Networking.
2 Double-click Make New Connection.
3 Select the correct modem, if not already selected.
4 Type a name for the connection and click Next.
5 Type a phone number for the connection and click Next.
6 You should see a message indicating that a new connection was created
successfully.
7 Click Finish.
8 A New Connection icon will be created in the Dial-Up Networking
Window. Move your cursor to the new icon you have just created and
click the right mouse button. Select Properties on the menu to display the
following window:
The following screen may vary slightly depending on the version of
Windows 95/98 you are using.
Do this
Click Add | Protocol | Microsoft | TCP/IP | OK.
Insert your Windows 95/98 Setup diskette or
CD-ROM when you are prompted, and Windows
95/98 installs TCP/IP protocol support.
Go to Step 3.