Saving Rom Templates To Nvram; Default Settings - 3Com 56K Command Reference Manual

5-4 C 5: W
HAPTER ORKING WITH
Saving ROM
Templates to NVRAM

Default Settings

M
EMORY
All of the settings in each template are given in Appendix C, Flow Control
Templates.
For more information about hardware and software flow control, See
Chapter 12, Flow Control.
To save one of the three ROM templates to NVRAM and have it serve as
the reset default, enter
When the Business Modem is turned on it loads the settings stored in
NVRAM. By default, these settings are that same as the &F1 template.
You can save any of the three templates, or save modified versions of
them, in NVRAM for use as power-on defaults.
For your modem to
Display NVRAM settings (&F1 settings)
Substitute a template (other than &F1)
Save modified versions of the settings to
NVRAM
See Appendix C, Flow Control Templates for a complete listing of the
default values.
n
AT&F &W
Command
ATI5
AT&F2&W
(Default)
AT<settings>&W
Example
ATI5
AT&F2&W
ATS10=40&A2&W