Software Flow Control - 3Com 56K Command Reference Manual

Software Flow
control
The table below lists the Software flow control template. To load this
template send to the modem.
AT&F2
.
NVRAM Options
Handshake option
Transmitter
Command mode echo E1
Online local echo
Training tone volume
Speaker control
Result codes
Verbal or numeric
result codes
Result code subset
Protocol response
codes
Serial port rate select
Carrier Detect
Guard tone
Transmit data
hardware flow control
Record data software
flow control
Analog data
compression
Normal lines
Error control
Link rate select
Pulse dialing typE
Record data hardware
flow control
Data Set Ready
Remote Digital
Loopback (RDL)
Break handling
Setting Description
B0 ITU-T answer sequence
C1 Enabled
Enabled
F1 Disabled
L2 Medium
M1 ON during dial through connect
Q0 Enabled
V1 Verbal result codes
X7 Extended. Includes all codes except
VOICE
&A3 Full protocol codes
&B1 Serial port rate fixed higher than connect
rate
&C1 Normal operations
&G0 U.S./Canada
&H2

Software flow control

&I2 Enabled
&K1 Enabled
&L0 Normal lines
&M4 Normal/error control
&N0 Variable
&P0 U.S./Canada
&R2 Enabled
&S0 Always on
&T5 Deny RDL
&Y1 Clear buffer, send immediately
Software Flow control C-3