Cisco WS-C3560-48PS-S Software Configuration Manual page 837

Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Uploading an Image File By Using RCP
You can upload an image from the switch to an RCP server. You can later download this image to the
same switch or to another switch of the same type.
The upload feature should be used only if the HTML pages associated with the CMS have been installed
with the existing image.
Beginning in privileged EXEC mode, follow these steps to upload an image to an RCP server:
Command
Step 1
Step 2
Step 3 configure terminal
Step 4 ip rcmd remote-username username
Step 5
end
Step 6
archive upload-sw
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
The archive upload-sw privileged EXEC command builds an image file on the server by uploading these
files in order: info, the Cisco IOS image, and the HTML files. After these files are uploaded, the upload
algorithm creates the tar file format.
Caution For the download and upload algorithms to operate properly, do not rename image names.
78-16156-01
Purpose
Verify that the RCP server is properly configured by
referring to the "Preparing to Download or Upload an Image
File By Using RCP" section on page
Log into the switch through the console port or a Telnet
session.
Enter global configuration mode.
This step is required only if you override the default remote
username (see Steps 4 and 5).
(Optional) Specify the remote username.
Return to privileged EXEC mode.
Upload the currently running switch image to the RCP
server.
• For //username, specify the username; for the RCP copy
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the "Preparing to Download or Upload
an Image File By Using RCP" section on page
For @location, specify the IP address of the RCP
•
server.
For /directory]/image-name.tar, specify the directory
•
(optional) and the name of the software image to be
uploaded. Directory and image names are case
sensitive.
The image-name.tar is the name of software image to
•
be stored on the server.
Catalyst 3560 Switch Software Configuration Guide
Working with Software Images
B-29.
B-29.
B-33