Cisco WS-C3560-48PS-S Software Configuration Manual page 169

Chapter 8 Configuring Switch-Based Authentication
authenticate users; if that method fails to respond, the software selects the next authentication method in
the method list. This process continues until there is successful communication with a listed
authentication method or until all defined methods are exhausted. If authentication fails at any point in
this cycle—meaning that the security server or local username database responds by denying the user
access—the authentication process stops, and no other authentication methods are attempted.
Beginning in privileged EXEC mode, follow these steps to configure login authentication:
Command
Step 1
configure terminal
Step 2 aaa new-model
Step 3
aaa authentication login {default |
list-name} method1 [method2...]
Step 4 line [console | tty | vty] line-number
[ending-line-number]
78-16156-01
Purpose
Enter global configuration mode.
Enable AAA.
Create a login authentication method list.
• To create a default list that is used when a named list is not specified
in the login authentication command, use the default keyword
followed by the methods that are to be used in default situations. The
default method list is automatically applied to all ports.
For list-name, specify a character string to name the list you are
•
creating.
For method1..., specify the actual method the authentication
•
algorithm tries. The additional methods of authentication are used
only if the previous method returns an error, not if it fails.
Select one of these methods:
enable—Use the enable password for authentication. Before you can
•
use this authentication method, you must define an enable password
by using the enable password global configuration command.
group tacacs+—Uses TACACS+ authentication. Before you can use
•
this authentication method, you must configure the TACACS+ server.
For more information, see the
and Setting the Authentication Key" section on page
• line—Use the line password for authentication. Before you can use
this authentication method, you must define a line password. Use the
password password line configuration command.
• local—Use the local username database for authentication. You must
enter username information in the database. Use the username
password global configuration command.
• local-case—Use a case-sensitive local username database for
authentication. You must enter username information in the database
by using the username name password global configuration
command.
none—Do not use any authentication for login.
•
Enter line configuration mode, and configure the lines to which you want
to apply the authentication list.
Catalyst 3560 Switch Software Configuration Guide
Controlling Switch Access with TACACS+
"Identifying the TACACS+ Server Host
8-13.
8-15