Cisco WS-C3560-48PS-S Software Configuration Manual page 67

Chapter 3 Getting Started with CMS
•
Table 3-1 Toolbar Buttons
Toolbar Option Icon
Print
1
Preferences
Save
2
Configuration
Software
2
Upgrade
1
Port Settings
1
VLAN
Inventory
Refresh
Front Panel
3
Topology
Topology
3
Options
Save Topology
2 3
Layout
Legend
Help for Active
Window
1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the
2. Some options from this menu option are not available in read-only mode.
3. Available only from a cluster-management session.
78-16156-01
The toolbar provides buttons for commonly used switch and cluster configuration options and
information windows such as legends and online help.
to right on the toolbar.
Task
Print a CMS window or help file.
Set CMS display properties, such as polling intervals, the views to open at CMS startup, and the
color of administratively shutdown ports.
Save the configuration of the cluster or a switch to Flash memory.
Upgrade the software for the cluster or a switch.
Display and configure port parameters on a switch.
Display VLAN membership, assign ports to VLANs, and change the administration mode.
Display the device type, the software version, the IP address, and other information about a switch.
Update the views with the latest status.
Display the Front Panel view.
Display the Topology view.
Select the information to be displayed in the Topology view.
Save your arrangement of the cluster icons in the Topology view to Flash memory.
Display the legend that describes the icons, labels, and links.
Display the help for the active, open window. You can also click Help from the active window or
press the F1 key.
Table 3-1 lists the toolbar options from left
"Privilege Levels" section on page
Catalyst 3560 Switch Software Configuration Guide
Understanding CMS
3-7.
3-3