Cisco WS-C3560-48PS-S Software Configuration Manual page 654

Configuring BGP
Table 30-10 Default BGP Configuration (continued)
Feature
IP prefix list
Multi exit discriminator (MED)
Neighbor
Route reflector
Synchronization (BGP and IGP)
Table map update
Timers
Catalyst 3560 Switch Software Configuration Guide
30-46
Default Setting
None defined.
Always compare: Disabled. Does not compare MEDs for paths from neighbors in
•
different autonomous systems.
Best path compare: Disabled.
•
MED missing as worst path: Disabled.
•
Deterministic MED comparison is disabled.
•
• Advertisement interval: 30 seconds for external peers; 5 seconds for internal peers.
• Change logging: Enabled.
Conditional advertisement: Disabled.
•
Default originate: No default route is sent to the neighbor.
•
Description: None.
•
Distribute list: None defined.
•
• External BGP multihop: Only directly connected neighbors are allowed.
• Filter list: None used.
• Maximum number of prefixes received: No limit.
• Next hop (router as next hop for BGP neighbor): Disabled.
• Password: Disabled.
Peer group: None defined; no members assigned.
•
Prefix list: None specified.
•
Remote AS (add entry to neighbor BGP table): No peers defined.
•
Private AS number removal: Disabled.
•
• Route maps: None applied to a peer.
• Send community attributes: None sent to neighbors.
• Shutdown or soft reconfiguration: Not enabled.
• Timers: keepalive: 60 seconds; holdtime: 180 seconds.
• Update source: Best local address.
Version: BGP version 4.
•
Weight: Routes learned through BGP peer: 0; routes sourced by the local router:
•
32768.
None configured.
Enabled.
Disabled.
Keepalive: 60 seconds; holdtime: 180 seconds.
Chapter 30 Configuring IP Unicast Routing
78-16156-01